Click image to view full size image
Model Number: 500 LPH
Brand Name: SOLUTIONS PACKAGING
Key Specifications/Special Features:
Capacity utilization: 91 to 95%Inputs (wastewater quality) to RO plantTotal dissolved solids: <1000ppmOutput (treated water quality) from RO plantTotal dissolved solids: <50ppmTechnical specifications:1 raw water pumpPurpose to feed dual media filter at pressure more than 2.0 bar, which is min operating pressure for filtera) Specifications:b) Type: horizontal centrifugalc) Power required: 1HP
d) Electrical: 230V, single phase and 50Hz
e) Make: CRI or lubi
2-dual media filter
Purpose to remove total suspended solids, dirt, iron and reduce silt density index which can foul membranes
Specifications vessel:
a) Make: pentair, RoHS Directive-compliant or equivalent
b) Material of construction: FRP
c) Diameter: 12"
d) Height: 48"
e) Testing pressure: 10kg/cm2
f) Opening: top
3 Activated carbon
Filter:
Purpose to remove total color, smell, odor, from water
4 dosing system
Purpose to dose anti-sealant chemical to protect scaling formation on RO membranes
Specifications:
a) Capacity: 6LPH
b) Pressure: 7 bar
c) Make: edose
5 Micron filter
Purpose: to remove fine particles up to 05 microns and reduce silt density index levels to accepted level
Specifications cartridge filter and housing
Housing:
a) Length: 20"
b) Diameter: 2.5"
Cartridge:
c) Make: filtration
d) Cartridge
e) Length: 20"
f) Diameter: 2.5"
g) Micron rating: 05 micron
6 High pressure pump
Purpose: to feed reverse osmosis membrane at pressure more than osmotic pressure taking into consideration flux rate, flow and recovery
Specifications:
a) Type: vertical multiple stage
b) Power required: 2HP
c) Electrical: 230V, single phase, 50Hz
d) Make: CRI, lubi or equivalent
7 RO membrane
Purpose: to remove major part of TDS up to 98% by reverse osmosis membranes arranged and designed to give adequate flow and recovery
Specifications:
a) Type: spiral wounded
b) Diameter of membrane: 4.0 inches
c) Length of membranes: 1MT
d) No of membranes: 2
f) Salt rejection per membrane: 98-99%
g) Make of membranes: dow, the US
h) System recovery: 50-70%
d) Electrical: 230V, single phase and 50Hz
e) Make: CRI or lubi
2-dual media filter
Purpose to remove total suspended solids, dirt, iron and reduce silt density index which can foul membranes
Specifications vessel:
a) Make: pentair, RoHS Directive-compliant or equivalent
b) Material of construction: FRP
c) Diameter: 12"
d) Height: 48"
e) Testing pressure: 10kg/cm2
f) Opening: top
3 Activated carbon
Filter:
Purpose to remove total color, smell, odor, from water
4 dosing system
Purpose to dose anti-sealant chemical to protect scaling formation on RO membranes
Specifications:
a) Capacity: 6LPH
b) Pressure: 7 bar
c) Make: edose
5 Micron filter
Purpose: to remove fine particles up to 05 microns and reduce silt density index levels to accepted level
Specifications cartridge filter and housing
Housing:
a) Length: 20"
b) Diameter: 2.5"
Cartridge:
c) Make: filtration
d) Cartridge
e) Length: 20"
f) Diameter: 2.5"
g) Micron rating: 05 micron
6 High pressure pump
Purpose: to feed reverse osmosis membrane at pressure more than osmotic pressure taking into consideration flux rate, flow and recovery
Specifications:
a) Type: vertical multiple stage
b) Power required: 2HP
c) Electrical: 230V, single phase, 50Hz
d) Make: CRI, lubi or equivalent
7 RO membrane
Purpose: to remove major part of TDS up to 98% by reverse osmosis membranes arranged and designed to give adequate flow and recovery
Specifications:
a) Type: spiral wounded
b) Diameter of membrane: 4.0 inches
c) Length of membranes: 1MT
d) No of membranes: 2
f) Salt rejection per membrane: 98-99%
g) Make of membranes: dow, the US
h) System recovery: 50-70%
Shipping Information:
- FOB Port: Ludhiana, Punjab, India
- Lead Time: 15 - 30 days
Main Export Markets:
- Asia